 |
Environmental Laboratory
List of measuring and testing
equipment
(with photos)
1.
Digital
gas analyzer “TESTO 350”
– extremely suitable for conducting emission control: determination
of O2, CO2, CO, NOX, NO, NO2,
SO2 concentration, differential pressure, speed, humidity,
gas flow temperature etc.
Measuring
range:
CO
– up
to 40000
ppm
O2
- 21%
NOX
- up
to 3000
ppm
NO
- up
to 3000
ppm
NO2
- up
to 500
ppm
SO2
- up
to 5000
ppm
- Testo
520 – digital device for
measuring differential and relative pressure
Measuring
range:
0-20/200
mbar
- Testo
512 – digital device for
measuring positive and negative pressure, differential pressure
and gas flow speed
Measuring
range:
0-200
mbar
- Atomic
Absorption Spectrophotometer “PERKIN ELMER” 2380
– quantitative analysis of
Cd, Pb, Zn, Cu, Fe, As, Hg,
Ni, Cr etc.
- Atomic
Absorption Spectrophotometer “Varian - SpectrAA”
– quantitative analysis of Cd, Pb, Zn, Cu, Fe, As, Hg, Ni, Cr
etc.
- UV
Vis Spectrophotometer – ion
content (quantitative
analysis of NO3-, NO2-,
Cl-, NH4+, PO43-
etc.)
- Digital
scale “SARTORIUS“ – mass
determination (four digits after the decimal point)
Measuring
range:
from
0 to
210 g
- Gas
analyzer “DRÄGER MULTIWARN II” (2 items)
- suitable for conducting imission
control: determination
of combustible gases (H2
etc), H2S, SO2,
NO2, CO, O2
Measuring
range:
Combustible
gases –
îò 0 äî 100 %
H2S
– from
0
to
500
ppm
SO2
– from
0
to
100 ppm
NO2
– from
0
to
50
ppm
CO
– from
0
to
500 ppm
O2
– from
0
to
25 %
- Digital
thermometer “COMECO H 5600”
with thermometric probe type Fe-CuNi (3 items)
– measurement of gas flow temperature
Measuring
range:
from
0 to
600 ÎC
- pH
meter “MS 2011” with
electrode “SENSOREX 120 C” – pH
measurement
Measuring
range:
from
0 to
14 pH
- “TESTO
435” – measurement
of gas flow speed, flow and temperature
Measuring
range:
Combined
probe (¹
0635.1043): from
0 to
20 m/s;
from
–20 to
+70 ÎÑ
Probe
(¹ 0635.9544): from
0.2 to
40 m/s;
from
0 to
60 ÎÑ
- “CASELLA
AMS 950” – suitable
for imission control: determination of total suspended particulate
matter and respirarable dust fraction by means of parallel application
and comparison of standard gravimetric techniques using beam of
infrared light
Measuring
range:
from
0 to
20 mg/m3
from
0 to
200
mg/m3
- “TOXILOG”
- suitable for imission control: determination of CO è
SO2 content
Measuring
range:
CO
– from 0
to
999 ppm
SO2
- from 0
to
100
ppm
- Barometer
aneroid “MD-49-2” – measurement
of barometric pressure
Measuring
range:
from
600 to
790 mmHg
- Mercury
thermometer (6 items)
– temperature measurement
Measuring
range:
from
-30 to
+50 ÎC
(2 items)
from
0 to
400 ÎC
(2 items)
from
30 to
100 ÎC
from
0 to
800 ÎC
- Air
flowmeter “SKC”, “CHROMSERVIS”
– flow measurements
Measuring
range:
from
0.5 to
5 l/min
- Digital
air flowmeter “OPTIFLOW 650”, “CHROMSERVIS - flow
measurements
Measuring
range:
from
0.005 to
5 l/min
- Inclined
tube liquid micro manometer ¹435,
“VARIMEX”
– pressure measurement
Measuring
range:
from
0 to
200 Pa
- Gas
flow meter
GSM – suitable for gas
flow measurements
- Dust
sampling pump “ÒÅÊÎRA”, “BRAVO M2” – suitable
for emission and imission control: determination of total suspended
particulate matter, PM 10 and PM 2.5
Measuring
range:
from
0
to
30
l/min
- Universal
sampling pump
“SKC
224 PCXP4” - suitable
for imission control: determination of total suspended particulate
matter, PM 10 and PM 2.5
Measuring
range:
from
0
to
5
l/min
- Sampling
pump “SKC 222-3” - suitable
for imission control: determination of total suspended particulate
matter
Measuring
range:
from
50
to
200 ml/min
- Air
sampling device “SKC MCS-10” - suitable
for imission control: determination
of total suspended particulate matter
Measuring
range:
From
0
to 12
l/min
- Sampling
pump “CASELLA AFC 123”
- suitable for imission control: determination of total suspended
particulate matter
Measuring
range:
from
0
to
2
l/min
- Gas
sampling device PAG
– 1 ÀÌ, ¹¹ 043, 044 (2 items)
- suitable for emission control:
determination of SO2 concentration in gas flows.
Measuring
range:
from
0.4 to
1.2
l/min
- Wide
range sampling aspirator “SPA
20/600” (2 items)
- suitable for imission control:
determination of total suspended particulate matter
Measuring
range:
From
0 to
200 l/min
- Mercury
thermometer (field) (8 items)
– temperature measurement
Measuring
range:
from
30 to
100 ÎC
from
0 to
300 ÎC
– 3 áð.
from
0 to
1050 ÎC
from
0 to
100 ÎC
from
0 to
110 ÎC
from
–10 to
100 ÎC
- Biological
thermostat ÒB
50 – biological
oxygen demand
- Drying
cabinet with microprocessor thermoregulator
“RT 18”.
Measuring
range:
from
0 to
500 ÎC
- Sampling
tubes - suitable
for imission control:
- determination of CO, SO2,
NOX (NO2 + NO) etc.
Measuring
range:
CO
– from 10
to
900 mg/m3
SO2
- from
20
to
250
mg/m3
NOX
(NO2 + NO) - from
1 to
15
mg/m3
Home | Equipment
| Certificate | Prices
| Team | Contacts
|
|
